BD Diesel Transmission Kit – 2003-2004 Dodge 48RE 4WD with Tap Shifter & Billet Input Shaft – Part # 1064194BFT
$10,359.99
All new bushings; New design valve body; Stock thrust washers replaced with roller Torrington bearings saves governor solenoids and reduces friction; Drilled intermediate shaft for increased lube; Modified manual valve for lube in all positions; 47RE transmissions upgraded with more rugged 48RE components; New input shafts and hub; Pressure increase starts at much lower engine rpm’s and at lighter throttle pedal position movement; Light throttle shift firmness is also maintained; No shuttle shifting problems; Upgraded governor pressure transducer (47RE/48RE); Cooler line case saver in every transmission; Added heavy-duty clutches with up to 25% more material than stock; Machined forward (rear) beveled pressure plate; Machined forward (rear) beveled pressure plate; Machined overdrive brake (front & rear) pressure plate; Machined direct clutch (front) piston; High temp/energy Raybestos band; Billet band strut & anchor; Billet dual ring accumulator piston; BD auxiliary full flow filter kit for extra protection; Clutch Count: FORWARD 5; Fully rollerized geartrain; Clutch Count: DIRECT 6; Increase the durability of your drivetrain; Revised oil circuits; Handles up to 300% more power and torque than the stock transmission.
Transmission Kit; w/Tap Shifter and Billet Input; Incl. 47RE Trans. Upgraded w/48RE Components/Plug-In Wiring Harness/Model Shift Lever/Control Module/Gear Selection Display;
- Includes new model shift lever, BD control module, BD gear selection display and wiring harness
- Upgraded governor pressure transducer (47RE/48RE) – Twice the burst pressure than stock
- Use Of Third Party Or OE Converter Will Invalidate Trans. Warranty
- Stock thrust bushings replaced with roller Torrington bearings
- Sealed plug-in wiring, no cutting or tapping of wires required
- Up To 80% Higher Clutch Apply Pressures Over The Stock Unit
- Works with stock shifting and has gear limiting function
- Provides manual torque converter lock-up clutch control
- BD auxiliary full flow filter kit for extra protection
- Drilled intermediate shaft for increased lubrication
- Modified manual valve for lube in all positions
- Pan heat-dissipating fins keep temperature down
- BD rigid aluminum heavy duty transmission pan
- Cooler line case saver in every transmission
- Increase the durability of your drivetrain
- Not warranted for Race or Sled Pull use
- Every transmission is tested on a dyno
- Increased line pressure to 190-200psi
- Billet “Big” fine spline input shaft
- Pan Adds 1qt Extra Oil Capacity
- High temp/energy Raybestos band
- Pan adds 2qt extra oil capacity
- No shuttle shifting problems
- Clutch Count: OD DIRECT 10
- Upgraded governor solenoid
- Clutch Count OD DIRECT 10
- Clutch Count: FORWARD 5
- Clutch Count: DIRECT 6
- No Race Abuse Covered
- Upgraded Valve body
- Magnetic drain plug
- Clutch Count: OD 6
- Clutch Count OD 6
- Billet band strut
- Billet band lever
Out of stock
The BD Diesel 1064194BFT transmission kit is engineered specifically for heavy-duty Dodge Ram trucks from 2003 to 2004, offering enhanced durability and performance for demanding fleet and towing applications. This comprehensive upgrade integrates the latest design improvements, including all-new bushings, a redesigned valve body, and a high-performance control module, ensuring reliable operation under extreme conditions. The kit features a fully rollerized geartrain and an upgraded governor pressure transducer with twice the burst pressure of stock components, providing increased torque capacity and smoother shifting. Additionally, the inclusion of a BD auxiliary full flow filter kit and drilled intermediate shaft optimizes lubrication and component longevity, reducing wear and minimizing downtime.
The upgraded components—such as heavy-duty clutches with up to 25% more material, machined pressure plates, billet band struts, and a high-temp Raybestos band—are designed to handle up to 300% more power and torque than factory specifications. The transmission’s revised oil circuits, higher line pressure capabilities, and improved oil capacity ensure consistent performance and heat management during severe towing and heavy-duty use. This kit also features a billet
Fitment:
Dodge Ram 2500 Laramie 2003
Dodge Ram 2500 SLT 2003 to 2004
Dodge Ram 2500 ST 2003 to 2004
Dodge Ram 3500 Laramie 2003 to 2004
Dodge Ram 3500 SLT 2003 to 2004
Dodge Ram 3500 ST 2003 to 2004
| Weight | 250 lbs |
|---|---|
| Dimensions | 44.5 × 27.3 × 23.5 in |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | true |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| core charge | 1800 |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 019025020382 |
| brand | BD Diesel |
| part_number | 1064194BFT |
Related products
BD Diesel T14