BD Diesel Transmission Kit – Part # 1064234FT

$9,110.99

All new bushings; New design valve body; Stock thrust washers replaced with roller Torrington bearings saves governor solenoids and reduces friction; Drilled intermediate shaft for increased lube; Modified manual valve for lube in all positions; 47RE transmissions upgraded with more rugged 48RE components; New input shafts and hub; Pressure increase starts at much lower engine rpm’s and at lighter throttle pedal position movement; Light throttle shift firmness is also maintained; No shuttle shifting problems; Upgraded governor pressure transducer (47RE/48RE); Cooler line case saver in every transmission; Added heavy-duty clutches with up to 25% more material than stock; Machined forward (rear) beveled pressure plate; Machined forward (rear) beveled pressure plate; Machined overdrive brake (front & rear) pressure plate; Machined direct clutch (front) piston; High temp/energy Raybestos band; Billet band strut & anchor; Billet dual ring accumulator piston; BD auxiliary full flow filter kit for extra protection; Clutch Count: FORWARD 5; Fully rollerized geartrain; Clutch Count: DIRECT 6; Increase the durability of your drivetrain; Revised oil circuits; Handles up to 300% more power and torque than the stock transmission.
Transmission Kit; w/Tap Shifter and TVV Stepper Motor; Incl. 47RE Trans. Upgraded w/48RE Components/Wiring Harness/Model Shift Lever/Control Module/Gear Selection Display;

  • Includes new model shift lever, BD control module, BD gear selection display and wiring harness
  • Upgraded governor pressure transducer (47RE/48RE) – Twice the burst pressure than stock
  • Sealed plug-in wiring, no cutting or tapping of wires required
  • Stock thrust bushings replaced with roller Torrington bearings
  • Up To 80% Higher Clutch Apply Pressures Over The Stock Unit
  • Works with stock shifting and has gear limiting function
  • Provides manual torque converter lock-up clutch control
  • BD auxiliary full flow filter kit for extra protection
  • Drilled intermediate shaft for increased lubrication
  • Pan heat-dissipating fins keep temperature down
  • Modified manual valve for lube in all positions
  • BD rigid aluminum heavy duty transmission pan
  • Cooler line case saver in every transmission
  • Increase the durability of your drivetrain
  • Not warranted for Race or Sled Pull use
  • Every transmission is tested on a dyno
  • Increased line pressure to 190-200psi
  • Pan Adds 1qt Extra Oil Capacity
  • Pan adds 2qt extra oil capacity
  • High temp/energy Raybestos band
  • No shuttle shifting problems
  • Clutch Count: OD DIRECT 10
  • Upgraded governor solenoid
  • Clutch Count OD DIRECT 10
  • Clutch Count: FORWARD 5
  • Clutch Count: DIRECT 6
  • No Race Abuse Covered
  • Magnetic drain plug
  • Upgraded Valve body
  • Clutch Count: OD 6
  • Clutch Count OD 6
  • Billet band strut
  • Billet band lever
Fitment Lookup:
 
 

Out of stock

Category:
.product-meta .sku_wrapper { display: none !important; }