2006-2008 Volkswagen Jetta, 2006-2008 Volkswagen GTI, 2006-2008 Audi A3 Clutch Kit Assembly – Heavy-Duty Twin Disc Performance Upgrade
$1,913.99
The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the trongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003” of flex where as a cast or stamped unit can see as much as .030” of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn’t wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.
DLX Street (TD8DLXS) 1 sprung ceramic disc, directly connected to 1 fiber tuff rigid disc
“Street and Race” (TD8S)1 sprung ceramic disc, and 1 fiber tuff rigid disc
Out of stock
The Clutch Masters 17020-TD8S-XH twin disc clutch kit is engineered for high-performance automotive applications, offering exceptional strength and reliability for fleet, street, and race vehicles. Crafted from billet aluminum and Type 3 hard anodized, this cover assembly features approximately 25% greater tensile strength compared to traditional cast units. This design significantly reduces flex—measuring only .003 inches—compared to cast or stamped covers that may flex up to .030 inches—ensuring a more direct, confident clutch engagement. This rigidity translates to consistent pedal feel and improved power transfer, effectively utilizing your engine’s full torque capacity.
Designed with a focus on durability and performance, the twin disc setup includes one sprung ceramic disc paired with a fiber tuff rigid disc, making it suitable for aggressive street driving or racing scenarios. The assembly’s robust construction ensures higher clamping force over the same contact area compared to standard covers, providing superior hold and torque capacity. This means your vehicle can handle increased power levels without sacrificing drivability or reliability. Easy to install and built for demanding conditions, this clutch kit is ideal for enthusiasts seeking a dependable upgrade that maximizes power delivery while maintaining smooth operation.
Whether for daily driving or competitive racing, this clutch kit offers the strength, consistency, and performance needed to keep your vehicle performing at its best. Compatible with a range of 2006-2008 Volkswagen Jetta, 2006-2008 Volkswagen GTI, and 2006-2008 Audi A3 models, it guarantees a precise fit and long-lasting service life in demanding applications.
Features:
- Billet aluminum cover assembly with Type 3 hard anodized finish for maximum strength and corrosion resistance
- Approximately 25% higher tensile strength than cast or stamped covers, reducing flex and increasing durability
- Minimal flex of only .003 inches ensures consistent clutch engagement and improved pedal feel
- Higher clamping force for superior power transfer and torque capacity
- Includes sprung ceramic disc and fiber tuff rigid disc for optimized street and racing performance
Fitment:
Audi A3 Base 2006 to 2007
Volkswagen Golf GL 2006
Volkswagen Golf GLS 2006
Volkswagen Golf GLS TDI 2006
Volkswagen Golf GTI 1.8T 2006
Volkswagen GTI Base 2006 to 2007
Volkswagen GTI Fahrenheit 2007
Volkswagen Jetta 2.0T 2006 to 2007
Volkswagen Jetta 2.5 2006 to 2007
Volkswagen Jetta GLI 2006 to 2008
Volkswagen Jetta S 2008
Volkswagen Jetta SE 2008
Volkswagen Jetta SEL 2008
Volkswagen Jetta TDI 2006
Volkswagen Jetta Value Edition 2006
Volkswagen Jetta Wolfsburg Edition 2007 to 2008
| Weight | 23 lbs |
|---|---|
| Dimensions | 16 × 16 × 4 in |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 17020-TD8S-XH |
| brand | Clutch Masters |
| part_number | 17020-TD8S-XH |
Related products
Clutch Kits & Components T14
Clutch Kits & Components T14
Clutch Kits & Components T14