2000-2006 Audi TT 1.8T MK1 6-Speed Street Clutch Kit with Aluminum Flywheel – Premium Replacement
$2,703.99
The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the trongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003” of flex where as a cast or stamped unit can see as much as .030” of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn’t wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.
Conversion kit, will not work with OEM flywheel, built to work exclusively with Clutch Masters flywheel
Out of stock
The Clutch Masters 02017-TD8S-AH clutch kit assembly offers a high-performance, durable solution for Audi TT models from 2000 to 2006 equipped with the 1.8T engine and 6-speed transmission. Crafted from billet aluminum and Type 3 hard anodized, this clutch cover assembly provides approximately 25% greater tensile strength compared to traditional cast or stamped units. Its machined design minimizes flex to only .003 inches, significantly reducing unwanted movement during clutch operation. This rigidity ensures that the driver experiences more consistent and confident engagement, with the diaphragm receiving the full, intended force from the throwout bearing without energy loss due to flexing. The increased clamp load from the stronger cover translates into superior holding capacity, maximizing power transfer and ensuring that your engine’s output is efficiently utilized. This clutch kit is designed exclusively to work with Clutch Masters flywheels, providing a reliable upgrade for street performance applications. It is not compatible with OEM flywheels, making it ideal for enthusiasts seeking a high-performance, aftermarket solution optimized for aggressive driving, spirited street use, or light track days. Built for durability and strength, this kit supports up to 600 ft/lbs of torque, ensuring long-lasting operation under demanding conditions.
Features:
- Billet aluminum cover assembly with Type 3 hard anodized finish for enhanced durability
- Approximately 25% higher tensile strength than cast or stamped covers
- Minimal flex of only .003 inches to improve engagement consistency
- Increased clamping force for superior power transfer
- Designed specifically for Clutch Masters flywheels, not compatible with OEM flywheels
- Supports up to 600 ft/lbs of torque, ideal for street and light track use
- Exclusive fitment for 2000-2006 Audi TT models with 1.8T engine and 6-speed transmission
Fitment:
Audi TT Base 2000 to 2006
Audi TT Quattro ALMS Edition 2002
Audi TT Quattro Base 2000 to 2006
| Weight | 25 lbs |
|---|---|
| Dimensions | 16 × 16 × 4 in |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 02017-TD8S-AH |
| brand | Clutch Masters |
| part_number | 02017-TD8S-AH |
Related products
Clutch Kits & Components T14
Clutch Kits & Components T14
Clutch Kits & Components T14