BD Diesel 2019-2022 Dodge 4WD 68RFE Transmission and Converter Stage 4 Package – Part # 1064294SM
$12,741.99
When you purchase a BD transmission and torque converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD’s own Heavy Duty pan that adds extra fluid capacity. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel’s power and torque demands, the clear choice is BD.
Transmission Kit; 68RFE Transmission; Stage 4; Incl. Converter Package;
- BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
- Special tuning required for 2019-up applications for increased line pressure. Line pressure controller not included.
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Riveted piston ensures alignment & eliminates vibration or embrittlement from welding
- BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
- Self-centering trapezoid teeth design increases contact decreases wear and chatter
- Steel girdle added to 2C piston to allow for more clutches and broader apply area
- Hard anodized valve body and new solenoid pack installed in every unit
- Furnaced brazed turbine fins for improved fluid coupling efficiency
- Heavy Duty Cam And Roller Design Low Reverse One Way Clutch
- BD Durable QT100 Pressure Plates For Increase Clutch Counts
- Over Drive clutches 33% increase & 2C clutches 33% increase
- Heavy duty cam & roller design low reverse one way clutch
- Reduced overall weight by 12lbs compared to competitors
- New sprag components ensure long term durability
- Valve Body And Solenoid Installed In Every Unit
- Thrust bearings – not plastic thrust washers
- Enhanced Stall – Street/Towing applications
- Taller cover can be rebuilt more often
- HD springs absorb shock of engagement
- Cast stator designs maximizes torque
- Eliminates warpage from clutch heat
- Custom Big Stack Overdrive Shaft
- Steel Girdle Added To 2C Piston
- BD Reinforced Accumulator Plate
- Custom Bonded Gasket Valve Body
- New 4C Billet Spring Retainer
- Engineered tighter tolerances
- Stamp forged 1-piece cover
- Trapezoid teeth design
- No Race Abuse Covered
- TORQUE CONVERTOR:
- TRANSMISSION:
Out of stock
The BD Diesel 2019-2022 Dodge 4WD 68RFE Transmission and Converter Stage 4 Package offers a comprehensive upgrade designed for demanding diesel applications. This matched set has been dyno tested together to ensure optimal performance, reliability, and durability under severe towing, street, or track conditions. The package includes a high-performance transmission with a BD heavy-duty aluminum pan that increases fluid capacity and enhances cooling, reducing case flex and promoting long-term operation. The assembly features BD’s own QT100 pressure plates, allowing for increased clutch counts, which improves torque capacity and engagement smoothness. Custom tuning is required for 2019 and newer models to accommodate increased line pressure, with a line pressure controller not included. The valve body incorporates a bonded gasket separator plate that elevates line pressure while preventing internal leaks, contributing to consistent clutch engagement and overall transmission health. Riveted pistons ensure proper alignment and eliminate vibrations caused by welding, further supporting reliable operation over time.
The transmission features a steel girdle added to the 2C piston, enabling more clutches and broader apply areas for enhanced torque handling. BD’s hardened anodized valve body and new solenoid pack are installed in every unit to withstand extreme conditions. Turbine fins are furnace brazed for improved fluid coupling efficiency, while the heavy-duty cam and roller low reverse one-way clutch enhances durability in severe duty scenarios. Overdrive and 2C clutches are increased by 33% to manage higher torque loads, and the overall weight is reduced by 12 pounds compared to competitors, aiding in vehicle responsiveness and efficiency. Additional components such as the steel girdle, reinforced accumulator plate, and tight tolerance assembly ensure long-term reliability. The package also features a taller rebuildable cover, HD springs for shock absorption, and a cast stator design that maximizes torque transfer while preventing warpage from clutch heat. For optimal performance, always replace the pilot bearing, throwout bearing, and resurface or replace the flywheel during installation, following the manufacturer’s break-in procedures for best results.
This upgrade is engineered to meet the demands of heavy-duty diesel fleets and enthusiast builds, providing a robust transmission solution that offers increased torque capacity, thermal management, and long-term drivetrain integrity. Whether for towing heavy loads or high-performance street use, the BD Diesel Stage 4 transmission and converter package is a reliable choice for your diesel powertrain.
Features:
- Heavy-duty torque capacity designed for severe fleet duty and high-torque diesel applications
- Premium friction materials for smooth, consistent clutch engagement and durability
- Enhanced thermal capacity to prevent clutch slippage during heavy towing and extended operation
- Long-term drivetrain reliability supported by reinforced components and precision engineering
Fitment:
Ram 2500 Big Horn 2019 to 2022
Ram 2500 Laramie 2019 to 2022
Ram 2500 Laramie Longhorn 2019 to 2022
Ram 2500 Limited 2019 to 2022
Ram 2500 Limited Longhorn 2021 to 2022
Ram 2500 Lone Star 2019 to 2022
Ram 2500 Tradesman 2019 to 2022
Ram 3500 Big Horn 2019 to 2022
Ram 3500 Laramie 2019 to 2022
Ram 3500 Laramie Longhorn 2019 to 2020
Ram 3500 Limited 2019 to 2022
Ram 3500 Limited Longhorn 2021 to 2022
Ram 3500 Lone Star 2019 to 2022
Ram 3500 SLT 2019 to 2022
Ram 3500 Tradesman 2019 to 2022
| Weight | 329 lbs |
|---|---|
| Dimensions | 44.5 × 27.3 × 23.5 in |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | true |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| core charge | 2500 |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 019025024120 |
| brand | BD Diesel |
| part_number | 1064294SM |
Related products
BD Diesel T14
BD Diesel T14