2005 Volkswagen Passat, 1999-2003 Audi A4 1.8T Heavy-Duty Race Clutch Kit with Billet Aluminum Cover – Premium Replacement
$1,737.99
The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the trongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003” of flex where as a cast or stamped unit can see as much as .030” of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn’t wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.
Conversion kit, will not work with OEM flywheel, built to work exclusively with Clutch Masters flywheel
Out of stock
The Clutch Masters 02-05 Audi A4 and 2005 Volkswagen Passat race clutch kit is engineered for high-performance automotive applications and demanding fleet use. Featuring a billet aluminum cover assembly that is Type 3 hard anodized, this clutch kit provides approximately 25% greater tensile strength than cast or stamped covers. This increased strength minimizes flex during clutch operation, allowing for more precise and confident engagement. The rugged design ensures only .003 inches of flex compared to up to .030 inches in inferior units, translating to consistent pedal feel and improved driver control under high torque loads. The enhanced clamping force offered by the billet cover guarantees optimal power transfer, making it suitable for vehicles generating up to 800 ft/lbs of torque, and ensures maximum efficiency for both street and track use. This conversion kit is designed exclusively for use with Clutch Masters flywheels and is not compatible with OEM flywheels, emphasizing its performance-oriented construction. The lightweight yet durable billet construction optimizes vehicle response without adding unnecessary weight, making it ideal for high-performance street driving or racing environments. Proper installation requires attention to mechanical linkage integrity, ensuring the pushrod is aligned correctly and travel is straight to prevent premature wear or binding of internal components. Our shop experience specializing in heavy-duty clutch systems since 1985 informs the importance of thorough setup procedures to maximize durability and operational reliability.
Features:
- Machined billet aluminum cover with Type 3 hard anodized finish for maximum durability
- Approximately 25% higher tensile strength than cast or stamped covers
- Minimal flex of only .003 inches to ensure consistent clutch engagement
- Enhanced clamping force for superior power transfer and driver confidence
- Built exclusively for Clutch Masters flywheels, not compatible with OEM flywheel
- Designed for high-torque applications up to 800 ft/lbs
- Optimized for high-performance automotive and heavy-duty fleet use
- Lightweight construction for improved response and reduced system flex
Fitment:
Audi A4 Base 1997 to 2005
Audi A4 Cabriolet 2003 to 2005
Audi A4 Quattro Avant 1999 to 2005
Audi A4 Quattro Base 1997 to 2005
Volkswagen Passat GL 2003 to 2005
Volkswagen Passat GLS 1998 to 2005
Volkswagen Passat GLS 4 Motion 2004 to 2005
| Weight | 25 lbs |
|---|---|
| Dimensions | 16 × 16 × 4 in |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 02027-TD8R-X |
| brand | Clutch Masters |
| part_number | 02027-TD8R-X |
Related products
Clutch Kits & Components T14
2005-2012 Porsche Boxster Clutch Kit Assembly FX400 6-Puck Dampened Disc – Premium Replacement
Clutch Kits & Components T14
Clutch Kits & Components T14