2006-2008 Volkswagen Jetta / 2006-2007 Volkswagen GTI / 2006-2008 Audi A3 2.0L TFSI Clutch Kit Assembly – Premium Heavy-Duty Replacement
$2,675.99
The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the trongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003” of flex where as a cast or stamped unit can see as much as .030” of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn’t wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.
DLX Street (TD8DLXS) 1 sprung ceramic disc, directly connected to 1 fiber tuff rigid disc
“Street and Race” (TD8S)1 sprung ceramic disc, and 1 fiber tuff rigid disc
Out of stock
The Clutch Masters 06-07 Audi A3 2.0L TFSI 8.50-inch Race Twin Disc Clutch Kit with Aluminum Flywheel is engineered for high-performance automotive applications and rugged industrial use. Crafted from billet aluminum and Type 3 hard anodized, this clutch cover assembly offers approximately 25% greater tensile strength compared to cast units, ensuring superior durability under demanding conditions. The machining focus on strength minimizes flex to just 0.003 inches, significantly less than cast or stamped covers that can flex up to 0.030 inches. This rigidity translates into consistent clutch engagement and disengagement, providing drivers with more precise control and confidence during operation. The increased clamping force exerted by this robust cover enhances power transfer efficiency, making it ideal for both street performance and racing environments. The twin-disc design, featuring a sprung ceramic disc paired with a fiber tuff rigid disc, ensures smooth engagement, reduced pedal effort, and superior heat dissipation. Suitable for vehicles such as the Volkswagen Jetta, GTI, and Audi A3 from 2006 to 2008, this kit is a reliable choice for fleet or high-performance applications requiring heavy-duty clutch solutions. Installation requires attention to clutch system alignment and mechanical linkage checks to prevent premature wear or binding, especially during clutch engagement or disengagement. Our shop experience specializing in heavy-duty brakes and clutch systems since 1985 underscores the importance of verifying proper pushrod alignment and ensuring a straight travel path for optimal longevity and performance.
Features:
- Billet aluminum construction with Type 3 hard anodized finish for maximum strength and corrosion resistance
- Minimal flex design at only 0.003 inches, enhancing clutch engagement consistency
- Increased tensile strength over cast units for improved durability under heavy loads
- Enhanced clamping force for better power transfer and driver confidence
- Twin disc design with sprung ceramic and fiber tuff rigid discs for smooth operation
- Compatible with 2006-2008 Volkswagen Jetta, 2006-2007 Volkswagen GTI, and 2006-2008 Audi A3 models with 2.0L TFSI engines
Fitment:
Audi A3 Base 2006 to 2007
Volkswagen Golf GL 2006
Volkswagen Golf GLS 2006
Volkswagen Golf GLS TDI 2006
Volkswagen Golf GTI 1.8T 2006
Volkswagen GTI Base 2006 to 2007
Volkswagen GTI Fahrenheit 2007
Volkswagen Jetta 2.0T 2006 to 2007
Volkswagen Jetta 2.5 2006 to 2007
Volkswagen Jetta GLI 2006 to 2008
Volkswagen Jetta S 2008
Volkswagen Jetta SE 2008
Volkswagen Jetta SEL 2008
Volkswagen Jetta TDI 2006
Volkswagen Jetta Value Edition 2006
Volkswagen Jetta Wolfsburg Edition 2007 to 2008
| Weight | 30 lbs |
|---|---|
| Dimensions | 16 × 16 × 4 in |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 17020-TD8S-AH |
| brand | Clutch Masters |
| part_number | 17020-TD8S-AH |
Related products
Clutch Kits & Components T14
Clutch Kits & Components T14
Clutch Kits & Components T14