2006-2010 Subaru Impreza WRX Clutch Kit Assembly – High-Performance Twin Disc Clutch System for Racing and Heavy-Duty Use – Premium Replacement
$1,532.99
“Race” (TD7R)2 ceramic rigid discs The Clutch Masters FX725 is a 7.25″ (184mm) Twin Disc clutch and is the ultimate in twin disk performance for engines/transmissions with smaller bell-housings that are focused on drag racing. Clutch Masters FX725 Twin Disc systems are developed from decades of experience in drag racing. Because of the minimal rotational mass the FX725 isn’t ideal for the street but with improvements in friction material over the years we have been able to create a solution that can handle occasional street driving. The FX725 is designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track. The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the strongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover.
“Street and Race” (TD7S)1 ceramic rigid disc, and 1 fiber tuff rigid disc
Out of stock
The Clutch Masters FX725 twin disc clutch kit is engineered for high-performance applications, especially suited for drag racing enthusiasts and demanding industrial environments. Featuring a 7.25-inch (184mm) ceramic rigid disc with a billet aluminum cover assembly, this system offers exceptional strength, minimal rotational mass, and reliable torque capacity. Its design draws from decades of drag racing experience, ensuring optimal power transfer while maintaining a reasonable pedal effort for occasional street use. The billet cover is Type 3 hard anodized, providing approximately 25% higher tensile strength compared to cast alternatives, and eliminating flex that could compromise clutch engagement under high loads. The kit also includes a street- and race-oriented setup with a ceramic rigid disc and a fiber tuff rigid disc, tailored for applications where durability and performance are critical. This assembly is ideal for heavy-duty fleet vehicles, modified street cars, and industrial equipment requiring dependable clutch operation. Installation requires careful attention to mechanical linkage and pushrod alignment to prevent premature wear or binding, especially during clutch engagement and disengagement phases. Our shop experience specializing in heavy-duty brakes and clutch systems since 1985 has shown that proper setup ensures longevity and maximum operational reliability of high-performance clutch components.
Features:
- 7.25-inch (184mm) twin disc clutch for high horsepower and torque capacity
- Ceramic rigid disc with high friction durability for drag racing and industrial applications
- Billet aluminum cover assembly with Type 3 hard anodized finish for increased strength and reduced flex
- Includes one ceramic rigid disc and one fiber tuff rigid disc for versatile performance
- Optimized for both occasional street driving and demanding racing environments
- Designed for vehicles with smaller bell-housings, such as Subaru Impreza models from 2006 to 2010
- Minimal rotational mass improves throttle response and reduces drivetrain stress
- Heavy-duty construction suitable for fleet, industrial, and high-performance automotive use
Fitment:
Subaru Impreza WRX 2006 to 2014
Subaru Impreza WRX Limited 2006 to 2007
Subaru Impreza WRX Limited 2010 to 2014
Subaru Impreza WRX Premium 2009 to 2014
Subaru Impreza WRX TR 2006 to 2007
Subaru WRX Base 2015 to 2017
Subaru WRX Limited 2015 to 2017
Subaru WRX Premium 2015 to 2017
| Weight | 14.4 lbs |
|---|---|
| Dimensions | 16 × 16 × 4 in |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 15021-TD7R-X |
| brand | Clutch Masters |
| part_number | 15021-TD7R-X |
Related products
Clutch Kits & Components T14
2010-2013 Mazda 3 2.5L FX350 Clutch Kit Assembly – Premium Replacement
Clutch Kits & Components T14
Clutch Kits & Components T14