2007-2008 Audi A4 Quattro 2.0T B7 Race Clutch Kit Assembly with Steel Flywheel – Heavy-Duty Performance Replacement
$2,498.99
The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the trongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003” of flex where as a cast or stamped unit can see as much as .030” of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn’t wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.
Conversion kit, will not work with OEM flywheel, built to work exclusively with Clutch Masters flywheel
Out of stock
The Clutch Masters 02025-TD8R-S race clutch kit is engineered for high-performance and heavy-duty applications, specifically designed for the 2007-2008 Audi A4 Quattro and 2008 Audi A4 models with 2.0T B7 engines. This comprehensive clutch assembly features a billet aluminum cover machined for exceptional strength and minimal flex, providing approximately 25% greater tensile strength compared to cast or stamped alternatives. The Type 3 hard anodized finish enhances durability, ensuring the cover maintains its integrity under demanding conditions. By significantly reducing flex to just 0.003 inches—versus 0.030 inches in lesser units—this clutch kit offers a more consistent and confident driving experience, allowing precise clutch engagement and disengagement. The increased clamping force delivered by the robust billet cover ensures effective power transfer, making it ideal for both high-performance street use and fleet reliability where maximum torque capacity is critical. This kit is built exclusively for use with Clutch Masters flywheels, as it is incompatible with OEM flywheels, emphasizing its tailored design for enhanced industrial and automotive performance. The assembly is rated to handle up to 800 ft/lbs of torque, making it suitable for demanding applications and ensuring long-term operational dependability. Installation considerations include verifying proper mechanical linkage and ensuring precise pushrod alignment to avoid premature wear or binding, critical for maintaining clutch longevity. Our shop experience specializing in heavy-duty brakes and clutch systems since 1985 underscores the importance of proper setup to maximize system performance and reliability.
Features:
- Billet aluminum cover with Type 3 hard anodized finish for increased strength and durability
- Approximately 25% more tensile strength than cast or stamped covers
- Minimal flex of only 0.003 inches to ensure consistent clutch operation
- Enhanced clamping force for maximum power transfer and high torque capacity
- Designed exclusively for use with Clutch Masters flywheels, not compatible with OEM flywheels
- Rated to handle up to 800 ft/lbs of torque for demanding applications
- Optimized for heavy-duty performance and fleet reliability
- Includes complete assembly for high-performance automotive and industrial use
Fitment:
Audi A4 Base 2005 to 2008
Audi A4 Cabriolet 2007 to 2008
Audi A4 Quattro Avant 2005 to 2008
Audi A4 Quattro Base 2005 to 2008
Audi A4 Quattro Cabriolet 2007 to 2008
| Weight | 25 lbs |
|---|---|
| Dimensions | 16 × 16 × 8 in |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 02025-TD8R-S |
| brand | Clutch Masters |
| part_number | 02025-TD8R-S |
Related products
Clutch Kits & Components T14
Clutch Kits & Components T14
Clutch Kits & Components T14