2005-2009 Audi S4 4.2L B7 Twin Disc Clutch Cover Assembly – Premium Replacement
$3,496.99
The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the trongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003” of flex where as a cast or stamped unit can see as much as .030” of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn’t wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.
Out of stock
The Clutch Masters 07-05 Audi S4 4.2L B7 Twin Disc Clutch Cover Assembly is engineered from billet aluminum and features Type 3 hard anodized coating for maximum durability and corrosion resistance. Our billet covers are designed with approximately 25% greater tensile strength compared to cast or stamped counterparts, resulting in superior structural integrity. The focus on machining the strongest possible cover while maintaining minimal weight allows for near-zero flex, with flex measurements as low as 0.003 inches, significantly less than the 0.030 inches typical of cast or stamped units. This reduction in flex ensures that the clutch’s input force is efficiently transferred directly to the diaphragm, providing more consistent engagement and disengagement. The increased strength of our covers also translates to a higher clamping force over the same contact area, allowing the twin discs to operate smoothly and confidently under high torque conditions. This design enhancement ensures that all engine power is effectively utilized, making it ideal for high-performance street and race applications. Whether you’re upgrading for reliability or maximum performance, this clutch cover assembly is a premium choice for demanding automotive and industrial fleet use. Precision-machined for perfect fitment, it guarantees enhanced durability and operational consistency for your vehicle’s clutch system, providing peace of mind on both daily drives and aggressive racing scenarios.
Features:
- Machined from billet aluminum for maximum strength and minimal weight
- Type 3 hard anodized finish for superior corrosion resistance
- Approximately 25% higher tensile strength than cast or stamped covers
- Minimal flex of only 0.003 inches to ensure consistent clutch engagement
- Increased clamping force for optimal power transfer
- Designed for high-performance street and racing applications
- Exact fitment for 2005-2009 Audi S4 4.2L B7 models
Fitment:
Audi S4 Avant 2005 to 2008
Audi S4 Base 2005 to 2008
Audi S4 Cabriolet 2005 to 2009
| Weight | 40 lbs |
|---|---|
| Dimensions | 17 × 17 × 7 in |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 02050-TD8S-S |
| brand | Clutch Masters |
| part_number | 02050-TD8S-S |
Related products
Clutch Kits & Components T14
Clutch Kits & Components T14
Clutch Kits & Components T14