BD Diesel Dodge 68RFE Transmission and Torque Converter Package – Part # 1064294BM
$13,873.99
When you purchase a BD transmission and torque converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD’s own Heavy Duty pan that adds extra fluid capacity. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel’s power and torque demands, the clear choice is BD.
BD TorqueMaster Dodge 68RFE Transmission & Converter Package – 2019-2022 4wd c/w Billet Input Shaft
- Performance Transmission but with the added touch of a Billet Input Shaft to take the “snap” from rapid throttle and high horsepower
- BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
- Special tuning required for 2019-up applications for increased line pressure. Line pressure controller not included.
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Riveted piston ensures alignment & eliminates vibration or embrittlement from welding
- BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
- Self-centering trapezoid teeth design increases contact decreases wear and chatter
- Steel girdle added to 2C piston to allow for more clutches and broader apply area
- Hard anodized valve body and new solenoid pack installed in every unit
- Furnaced brazed turbine fins for improved fluid coupling efficiency
- Heavy Duty Cam And Roller Design Low Reverse One Way Clutch
- BD Durable QT100 Pressure Plates For Increase Clutch Counts
- Over Drive clutches 33% increase & 2C clutches 33% increase
- Heavy duty cam & roller design low reverse one way clutch
- Reduced overall weight by 12lbs compared to competitors
- New sprag components ensure long term durability
- Valve Body And Solenoid Installed In Every Unit
- Thrust bearings – not plastic thrust washers
- Enhanced Stall – Street/Towing applications
- Taller cover can be rebuilt more often
- HD springs absorb shock of engagement
- Cast stator designs maximizes torque
- Eliminates warpage from clutch heat
- Custom Big Stack Overdrive Shaft
- Custom Bonded Gasket Valve Body
- Steel Girdle Added To 2C Piston
- BD Reinforced Accumulator Plate
- New 4C Billet Spring Retainer
- Engineered tighter tolerances
- Stamp forged 1-piece cover
- Trapezoid teeth design
- No Race Abuse Covered
- TORQUE CONVERTOR:
- TRANSMISSION:
- Triple Disc
1 in stock
The BD Diesel Dodge 68RFE Transmission and Torque Converter Package (Part # 1064294BM) is designed for heavy-duty applications requiring maximum durability and performance. This package includes a high-performance transmission with a forged billet input shaft, capable of handling rapid throttle inputs and high horsepower demands. The transmission features BD’s own Deep Sump Oil Pan, which increases fluid capacity and enhances cooling to keep the transmission operating at optimal temperatures under severe towing or street conditions. Equipped with BD’s durable QT100 pressure plates, this setup ensures increased clutch counts and reduces deflection and distortion within the clutch drum, promoting longer service life and consistent engagement.
The transmission is meticulously tuned for 2019 and newer models, with special line pressure adjustments to accommodate increased line pressures for demanding applications. A custom bonded gasket valve body separator plate prevents internal cross leaks while maintaining high pressure for reliable operation. Riveted pistons are used to ensure proper alignment and eliminate vibrations and embrittlement issues associated with welding, contributing to the overall durability of the assembly. The inclusion of a steel girdle on the 2C piston allows for more clutch packs and a broader apply area, which enhances torque capacity and shift quality.
Additional features include a furnace brazed turbine fin for improved fluid coupling efficiency, a heavy-duty cam and roller design for low reverse one-way clutch durability, and a taller rebuildable cover that extends service intervals. The valve body and solenoid pack are installed in every unit, ensuring seamless installation and operation. This package also boasts overdrive clutches with a 33% increase in capacity and a 33% increase in 2C clutches, along with reinforced components such as a steel girdle and a reinforced accumulator plate for long-term reliability. The entire assembly is engineered with tighter tolerances and features a stamped forged one-piece cover for added strength.
Designed for demanding towing, street, and track environments, this BD Diesel transmission and converter package provides enhanced thermal capacity, superior torque handling, and long-lasting performance, making it a reliable upgrade for your 2019-2022 Ram 2500/3500 4WD diesel truck.
Features:
- Heavy-duty diesel and fleet torque capacity for demanding towing and high-horsepower applications
- Premium friction materials for smooth, consistent engagement and durability
- Enhanced thermal capacity to prevent clutch slippage during severe towing and duty cycles
- Long-term drivetrain reliability with reinforced components and precision engineering
Fitment:
Ram 2500 Big Horn 2019 to 2024
Ram 2500 Laramie 2019 to 2024
Ram 2500 Laramie Longhorn 2019 to 2022
Ram 2500 Limited 2019 to 2024
Ram 2500 Limited Longhorn 2021 to 2024
Ram 2500 Lone Star 2019 to 2024
Ram 2500 Rebel 2023 to 2024
Ram 2500 Special Service 2024
Ram 2500 Tradesman 2019 to 2024
Ram 3500 Big Horn 2019 to 2024
Ram 3500 Laramie 2019 to 2024
Ram 3500 Laramie Longhorn 2019 to 2020
Ram 3500 Limited 2019 to 2024
Ram 3500 Limited Longhorn 2021 to 2024
Ram 3500 Lone Star 2019 to 2022
Ram 3500 SLT 2019 to 2024
Ram 3500 Special Service 2024
Ram 3500 Tradesman 2019 to 2024
| Weight | 329 lbs |
|---|---|
| Dimensions | 44.5 × 27.3 × 23.5 in |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | true |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| core charge | 2500 |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 019025024113 |
| brand | BD Diesel |
| part_number | 1064294BM |
Related products
BD Diesel T14
